NSN 5310-00-253-8258 · NIIN 002538258 · FSC 5310
NO DASHES 5310002538258
In Stock
NUT,PLAIN,SPLINE
Nuts and Washers
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-F-14072,FINISH E300 |
| ACTA | NUT STYLE | |
| ACTD | NUT DIAMETER | INCHES MINIMUM 0.247 AND INCHES MAXIMUM 0.253 |
| AAJD | THREAD CLASS | 2B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.196 AND INCHES MAXIMUM 0.200 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.138 |
| CRSQ | COUNTERSINK ANGLE | NUT DEGREES NOMINAL 45.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 302 OR STEEL COMP 303 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC 1ST MATERIAL RESPONSE QQ-S-763 OR ASSN STD 2ND MATERIAL RESPONSE AST- A582 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.075 AND INCHES MAXIMUM 0.085 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| BZRR | THREAD SERIES | UNIFIED NATIONAL COARSE (UNC) |
| ADEA | NUT HEIGHT | INCHES MINIMUM 0.296 AND INCHES MAXIMUM 0.328 |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 6251BSS0632-7 | 1YGB8 |
| 196-10-3 | 25549 |
| 425448-1 | 80020 |
| 422773-2 | 80020 |
| 196-10-3 | 92755 |
| 6251BSS0632-7 | 06540 |
| A343T300-101 | 10241 |
| 330-3058-490 | 13499 |
| 10687355-3 | 18876 |
Supersedes
This item replaces cancelled NIINs 009174900 · 012006264. An older drawing citing one of those numbers resolves here.