NSN 5310-00-285-5562 · NIIN 002855562 · FSC 5310
NO DASHES 5310002855562
In Stock
NUT,PLAIN,PLATE
Nuts and Washers
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2B |
| ADEB | PLATE THICKNESS | INCHES MINIMUM 0.031 AND INCHES MAXIMUM 0.063 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.098 AND INCHES MAXIMUM 0.103 |
| SFTT | SURFACE TREATMENT | OVERALL ANODIZE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC 1ST MATERIAL RESPONSE QQ-A-351-CANC OR FED SPEC 2ND MATERIAL RESPONSE QQ-A-355 |
| ADEC | PLATE WIDTH | INCHES MINIMUM 0.422 AND INCHES MAXIMUM 0.454 |
| ADFP | NUT MOUNTING PROVISION | STRAIGHT HOLES |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ACTA | NUT STYLE | |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | INCHES MINIMUM 0.683 AND INCHES MAXIMUM 0.693 |
| BZRR | THREAD SERIES | UNF |
| CMLP | THREAD QUANTITY PER INCH | 36 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.164 |
| CRSQ | COUNTERSINK ANGLE | NUT DEGREES MINIMUM 81.5 AND DEGREES MAXIMUM 82.5 |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 2017 OR ALUMINUM ALLOY 2024 |
| ACVN | NUT LENGTH | INCHES MINIMUM 0.953 AND INCHES MAXIMUM 0.985 |
| ADEA | NUT HEIGHT | INCHES MINIMUM 0.234 AND INCHES MAXIMUM 0.266 |
| AZKQ | TEMP RATING | FAHRENHEIT NOMINAL 250.0 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ-A-696 |
| ADFW | DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | INCHES MINIMUM 0.328 AND INCHES MAXIMUM 0.360 |
| ADFU | MOUNTING HOLE ARRANGEMENT STYLE |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 001413046. An older drawing citing one of those numbers resolves here.