NSN 5310-00-297-4085 · NIIN 002974085 · FSC 5310
NO DASHES 5310002974085
In Stock
WASHER,KEY
Nuts and Washers
Technical characteristics
14 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| STYL | STYLE DESIGNATOR | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7947,COND A |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 2 |
| CRZZ | WIRE HOLE DIAMETER | INCHES NOMINAL 0.062 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.451 AND INCHES MAXIMUM 0.467 |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 80205-NAS513 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 40.0 AND ROCKWELL C MAXIMUM 45.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 1095 |
| ABLK | INTERNAL PREBENT KEY WIDTH | INCHES MINIMUM 0.077 AND INCHES MAXIMUM 0.087 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.063 |
| ABKV | OUTSIDE DIAMETER | INCHES MINIMUM 0.630 AND INCHES MAXIMUM 0.632 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 180000 |
| CQFW | DISTANCE FROM KEY CENTER TO WIRE HOLE CENTER | INCHES MINIMUM 0.122 AND INCHES MAXIMUM 0.128 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 007738386. An older drawing citing one of those numbers resolves here.