NSN 5310-00-297-8901 · NIIN 002978901 · FSC 5310
NO DASHES 5310002978901
In Stock
NUT,PLAIN,HEXAGON
Nuts and Washers
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQFM | HARDNESS RATING | ROCKWELL B MINIMUM 80.0 AND ROCKWELL C MAXIMUM 32.0 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.500 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| BZRR | THREAD SERIES | UNF |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.738 AND INCHES MAXIMUM 0.752 |
| AGGP | DRILLED HOLE DIAMETER | INCHES NOMINAL 0.070 |
| ALET | HOLE TYPE AND QUANTITY | DRILLED 3 |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ACTA | NUT STYLE | |
| ADEA | NUT HEIGHT | INCHES NOMINAL 0.250 |
| CRTM | BEARING SURFACE TYPE | CHAMFERED |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| CRSQ | COUNTERSINK ANGLE | NUT DEGREES NOMINAL 110.0 |
| MATT | MATERIAL | OVERALL STEEL |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TEMPER 2 AND GRADE 2 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 2 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| LD114-0006-0005 | 43999 |
| 1N7-8A | 43999 |
| FF-N-836 | 81348 |