NSN 5310-00-326-4515 · NIIN 003264515 · FSC 5310
NO DASHES 5310003264515
In Stock
NUT SPACER,PLATE
Nuts and Washers
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 80205-NAS463 |
| CSSM | MOUNTING HOLE COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| ADEC | PLATE WIDTH | INCHES NOMINAL 0.594 |
| ADFR | MOUNTING PROVISION LOCATION | NUT PROJECTION SIDE |
| ADEB | PLATE THICKNESS | INCHES NOMINAL 0.090 |
| ACVN | NUT LENGTH | INCHES NOMINAL 1.281 |
| ADFU | MOUNTING HOLE ARRANGEMENT STYLE | |
| ACTA | NUT STYLE | |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.134 AND INCHES MAXIMUM 0.140 |
| ADAZ | THRU-HOLE DIAMETER | INCHES MINIMUM 0.385 AND INCHES MAXIMUM 0.395 |
| MATT | MATERIAL | OVERALL STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 316 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-6721 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-5059 |
| ADFW | DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | INCHES MINIMUM 0.497 AND INCHES MAXIMUM 0.503 |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | INCHES MINIMUM 0.310 AND INCHES MAXIMUM 0.314 |
| ADFP | NUT MOUNTING PROVISION | COUNTERSUNK HOLES |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| NAS463YC516H | 80205 |
| 10121311 | A486G |