NSN 5310-00-517-5193 · NIIN 005175193 · FSC 5310
NO DASHES 5310005175193
In Stock
NUT,SLEEVE
Nuts and Washers
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQJX | NOMINAL THREAD SIZE | INCHES 0.500 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6332 |
| SFTT | SURFACE TREATMENT | OVERALL ZINC |
| CBBL | FEATURES PROVIDED | CASE-HARDENED |
| ALET | HOLE TYPE AND QUANTITY | DRILLED 6 |
| ANLR | CROSS-SECTIONAL SHAPE | FLANGE HEXAGONAL |
| CRHC | HOLE CONFIGURATION STYLE | |
| CRSQ | COUNTERSINK ANGLE | NUT DEGREES NOMINAL 90.0 |
| AAJE | THREAD PITCH DIAMETERS | INCHES 0.4675 TO 0.4701 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.219 |
| ACTA | NUT STYLE | |
| ACTD | NUT DIAMETER | INCHES NOMINAL 0.688 |
| ACVN | NUT LENGTH | INCHES NOMINAL 0.250 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 20.0 AND ROCKWELL C MAXIMUM 26.0 |
| AFGG | FLANGE WIDTH ACROSS FLATS | INCHES MINIMUM 0.743 AND INCHES MAXIMUM 0.750 |
| ANLR | CROSS-SECTIONAL SHAPE | NUT ROUND |
| BZRR | THREAD SERIES | UNS |
| AGGP | DRILLED HOLE DIAMETER | INCHES NOMINAL 0.115 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 003504071. An older drawing citing one of those numbers resolves here.