NSN 5310-00-527-5097 · NIIN 005275097 · FSC 5310
NO DASHES 5310005275097
In Stock
NUT,PLAIN,ROUND
Nuts and Washers
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CMLP | THREAD QUANTITY PER INCH | 12 |
| ADBM | DRIVE POINT QUANTITY | 8 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 32.0 AND ROCKWELL C MAXIMUM 40.0 |
| ACTD | NUT DIAMETER | INCHES MINIMUM 5.110 AND INCHES MAXIMUM 5.130 |
| ADBG | NUT THICKNESS | INCHES MINIMUM 0.959 AND INCHES MAXIMUM 0.961 |
| CQJX | NOMINAL THREAD SIZE | INCHES 3.938 |
| MATT | MATERIAL | OVERALL STEEL COMP 4130 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6758 |
| ABPH | SMALL END DIAMETER | INCHES MINIMUM 4.5485 AND INCHES MAXIMUM 4.5495 |
| ABQU | DRIVE POINT DEPTH | INCHES MINIMUM 0.150 AND INCHES MAXIMUM 0.170 |
| ACTA | NUT STYLE | |
| AAJE | THREAD PITCH DIAMETERS | INCHES 3.8834 TO 3.8874 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| BZRR | THREAD SERIES | UNS |
| CBBL | FEATURES PROVIDED | CASE-HARDENED |
| ADBH | DRIVE POINT WIDTH | INCHES MINIMUM 0.370 AND INCHES MAXIMUM 0.390 |
| ADBJ | UNDERCUT THICKNESS | INCHES NOMINAL 0.660 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 170043 | 0AHP5 |
Supersedes
This item replaces cancelled NIINs 000330365 · 005454915. An older drawing citing one of those numbers resolves here.