NSN 5310-00-543-2252 · NIIN 005432252 · FSC 5310
NO DASHES 5310005432252
In Stock
WASHER,RECESSED
Nuts and Washers
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 6061 |
| CSYM | SURFACE FINISH | ALL SURFACES MICROINCHES 40.0 |
| CSTM | RECESS ANGLE | DEGREES MINIMUM 89.5 AND DEGREES MAXIMUM 90.5 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 1.805 AND INCHES MAXIMUM 1.807 |
| ABKV | OUTSIDE DIAMETER | INCHES MINIMUM 2.458 AND INCHES MAXIMUM 2.460 |
| ABMD | RECESS DIAMETER | INCHES MINIMUM 1.855 AND INCHES MAXIMUM 1.857 |
| ABMH | RECESS DEPTH | INCHES MINIMUM 0.015 AND INCHES MAXIMUM 0.035 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.219 AND INCHES MAXIMUM 0.221 |
| CQJW | TOP RECESS DIAMETER | INCHES MINIMUM 1.855 AND INCHES MAXIMUM 1.857 |
| CRKG | BOTTOM RECESS ANGLE | DEGREES MINIMUM 89.5 AND DEGREES MAXIMUM 90.5 |
| CRSD | TOP RECESS ANGLE | DEGREES MINIMUM 89.5 AND DEGREES MAXIMUM 90.5 |
| CSML | BOTTOM RECESS DIAMETER | INCHES MINIMUM 1.855 AND INCHES MAXIMUM 1.857 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-327 |
| FEAT | SPECIAL FEATURES | BOTH OUTSIDE EDGES ARE CHAMFERED 0.025 INCH BY 45 DEGREES PORM 1/2 DEGREE |
| SFTT | SURFACE TREATMENT | OVERALL CHROMATE |
| STYL | STYLE DESIGNATOR |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 76620 | 24930 |