NSN 5310-00-638-7160 · NIIN 006387160 · FSC 5310
NO DASHES 5310006387160
In Stock
NUT,PLAIN,ROUND
Nuts and Washers
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADBG | NUT THICKNESS | INCHES MINIMUM 0.710 AND INCHES MAXIMUM 0.750 |
| ABPH | SMALL END DIAMETER | INCHES NOMINAL 1.560 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| BZRR | THREAD SERIES | UNF |
| ACTA | NUT STYLE | |
| ADBJ | UNDERCUT THICKNESS | INCHES MINIMUM 0.560 AND INCHES MAXIMUM 0.580 |
| ADBM | DRIVE POINT QUANTITY | 4 |
| ACTD | NUT DIAMETER | INCHES MINIMUM 1.930 AND INCHES MAXIMUM 1.970 |
| AAJD | THREAD CLASS | 2B |
| CRHC | HOLE CONFIGURATION STYLE | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-6758 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-6050 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| AGGP | DRILLED HOLE DIAMETER | INCHES NOMINAL 0.136 |
| CRSQ | COUNTERSINK ANGLE | NUT DEGREES MINIMUM 88.0 AND DEGREES MAXIMUM 92.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 4130 OR STEEL COMP 8630 |
| ALET | HOLE TYPE AND QUANTITY | DRILLED 5 |
| CQJX | NOMINAL THREAD SIZE | INCHES 1.375 |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| ABQU | DRIVE POINT DEPTH | INCHES MINIMUM 0.150 AND INCHES MAXIMUM 0.180 |
| ADBH | DRIVE POINT WIDTH | INCHES MINIMUM 0.150 AND INCHES MAXIMUM 0.180 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 30-2661 | 81205 |