NSN 5310-00-661-2894 · NIIN 006612894 · FSC 5310
NO DASHES 5310006612894
In Stock
NUT,PLAIN,HEXAGON
Nuts and Washers
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 81205-BACN10DR |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 6,T6 OR T851 |
| CRSQ | COUNTERSINK ANGLE | NUT DEGREES NOMINAL 90.0 |
| CRTM | BEARING SURFACE TYPE | CHAMFERED |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 2024 |
| ACTA | NUT STYLE | |
| ALET | HOLE TYPE AND QUANTITY | DRILLED 2 |
| CMLP | THREAD QUANTITY PER INCH | 14 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.875 |
| CRHC | HOLE CONFIGURATION STYLE | |
| ASDB | WIDTH ACROSS FLATS | INCHES NOMINAL 1.125 |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AGGP | DRILLED HOLE DIAMETER | INCHES MINIMUM 0.070 AND INCHES MAXIMUM 0.080 |
| ADEA | NUT HEIGHT | INCHES MINIMUM 0.343 AND INCHES MAXIMUM 0.375 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-A-8625 |
| SFTT | SURFACE TREATMENT | OVERALL ANODIZE |
| BZRR | THREAD SERIES | UNIFIED NATIONAL JOINT FINE (UNJF) |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| BACN10DR10D | 50808 |
| BACN10DR10D | 81205 |
| BACN10DR10D | 82918 |
| BACN10DR10D | Z8T75 |
| BACN10DR10D | Z03F0 |
| BACN10DR10D | 11328 |
| BACN10DR10D | 14798 |
| BACN10DR10D | 14397 |