NSN 5310-00-728-0933 · NIIN 007280933 · FSC 5310
NO DASHES 5310007280933
In Stock
NUT,SELF-LOCKING,PLATE
Nuts and Washers
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQFM | HARDNESS RATING | ROCKWELL C MAXIMUM 49.0 |
| ADEA | NUT HEIGHT | INCHES MAXIMUM 0.422 |
| ADEB | PLATE THICKNESS | INCHES MAXIMUM 0.065 |
| ABAJ | LUBRICATION | DRY FILM LUBRICANT |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.130 AND INCHES MAXIMUM 0.135 |
| ADFU | MOUNTING HOLE ARRANGEMENT STYLE | |
| ADFW | DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | INCHES MINIMUM 0.495 AND INCHES MAXIMUM 0.505 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.312 |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ADFP | NUT MOUNTING PROVISION | STRAIGHT HOLES |
| AZKQ | TEMP RATING | FAHRENHEIT MAXIMUM 450.0 |
| BZRR | THREAD SERIES | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ACTA | NUT STYLE | |
| ACVN | NUT LENGTH | INCHES MAXIMUM 1.292 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 |
| MATT | MATERIAL | OVERALL STEEL |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| CRSQ | COUNTERSINK ANGLE | NUT DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | INCHES MINIMUM 0.998 AND INCHES MAXIMUM 1.002 |
| ADEC | PLATE WIDTH | INCHES MINIMUM 0.681 AND INCHES MAXIMUM 0.766 |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.