NSN 5310-00-728-5521 · NIIN 007285521 · FSC 5310
NO DASHES 5310007285521
In Stock
NUT,SELF-LOCKING,PLATE
Nuts and Washers
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT |
| ADEC | PLATE WIDTH | INCHES MINIMUM 0.609 AND INCHES MAXIMUM 0.641 |
| CQFM | HARDNESS RATING | ROCKWELL C MAXIMUM 32.0 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.375 |
| BZRR | THREAD SERIES | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ACVN | NUT LENGTH | INCHES MAXIMUM 1.296 |
| ADEA | NUT HEIGHT | INCHES MINIMUM 0.318 AND INCHES MAXIMUM 0.453 |
| ADEB | PLATE THICKNESS | INCHES MAXIMUM 0.115 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 3 |
| ADFP | NUT MOUNTING PROVISION | STRAIGHT HOLES |
| ADFU | MOUNTING HOLE ARRANGEMENT STYLE | |
| ADFW | DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | INCHES MINIMUM 0.495 AND INCHES MAXIMUM 0.505 |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | INCHES MINIMUM 0.998 AND INCHES MAXIMUM 1.000 |
| AZKQ | TEMP RATING | FAHRENHEIT NOMINAL 250.0 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| MATT | MATERIAL | NUT STEEL |
| ACTA | NUT STYLE | |
| CRSQ | COUNTERSINK ANGLE | NUT DEGREES MINIMUM 88.0 AND DEGREES MAXIMUM 102.0 |
| MATT | MATERIAL | LOCKING INSERT PLASTIC POLYAMIDE NYLON |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.130 AND INCHES MAXIMUM 0.135 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 7F42NA1-624 | 27698 |
| F42NA1-064 | 72962 |
| MS21078-6 | 80205 |
| MS21078-6 | 96906 |
| 803900 | 19203 |