NSN 5310-00-772-3962 · NIIN 007723962 · FSC 5310
NO DASHES 5310007723962
In Stock
NUT,SELF-LOCKING,PLATE
Nuts and Washers
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5525 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 5732 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 5737 |
| PRMT | PRECIOUS MATERIAL | SILVER |
| MATT | MATERIAL | OVERALL IRON ALLOY 660 |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| AAWY | COUNTERBORE DIAMETER | NUT INCHES MINIMUM 0.194 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.098 AND INCHES MAXIMUM 0.103 |
| ACTA | NUT STYLE | |
| ACVN | NUT LENGTH | INCHES MAXIMUM 0.948 |
| SFTT | SURFACE TREATMENT | OVERALL SILVER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S 2410 |
| ADFR | MOUNTING PROVISION LOCATION | OPPOSITE NUT PROJECTION SIDE |
| ADFU | MOUNTING HOLE ARRANGEMENT STYLE | |
| ADFW | DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER | INCHES MINIMUM 0.339 AND INCHES MAXIMUM 0.349 |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | INCHES MINIMUM 0.686 AND INCHES MAXIMUM 0.690 |
| CSSM | MOUNTING HOLE COUNTERSINK ANGLE | DEGREES MINIMUM 98.0 AND DEGREES MAXIMUM 102.0 |
| BZRR | THREAD SERIES | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ADFP | NUT MOUNTING PROVISION | COUNTERSUNK HOLES |
| PMLC | PRECIOUS MATERIAL AND LOCATION | SILVER ALL SURFACES |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQFM | HARDNESS RATING | ROCKWELL C MAXIMUM 49.0 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.190 |
| ADEC | PLATE WIDTH | INCHES MINIMUM 0.308 AND INCHES MAXIMUM 0.328 |
| AZKQ | TEMP RATING | FAHRENHEIT MAXIMUM 800.0 |
| ADEA | NUT HEIGHT | INCHES MAXIMUM 0.250 |
| ADEB | PLATE THICKNESS | INCHES MAXIMUM 0.047 |
| ADFK | NUT COUNTERBORE DEPTH | NUT INCHES MINIMUM 0.062 |
Cross-references
13 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| R2000C3K | 52828 |
| T2C1032BC | 52828 |
| 12700-02BC | 56878 |
| LHTA51-2860-02BC | 72962 |
| K1031-3BC | 75237 |
| NASM21048 | 80205 |
| MS21048-3K | 80205 |
| 12700-02BC | 80539 |
| 2700S02BC | 80539 |
| MS21048-3K | 96906 |
| K1031-3BC | R1120 |
| T2C1032BC | 11815 |
| K1031-3BC | 15653 |
Supersedes
This item replaces cancelled NIINs 006071657 · 008047935 · 008034696. An older drawing citing one of those numbers resolves here.