NSN 5310-00-808-3021 · NIIN 008083021 · FSC 5310
NO DASHES 5310008083021
In Stock
NUT,PLAIN,ROUND
Nuts and Washers
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPH | SMALL END DIAMETER | INCHES MINIMUM 1.390 AND INCHES MAXIMUM 1.410 |
| ACTD | NUT DIAMETER | INCHES MINIMUM 1.610 AND INCHES MAXIMUM 1.630 |
| ADBG | NUT THICKNESS | INCHES MINIMUM 0.990 AND INCHES MAXIMUM 1.010 |
| ADBH | DRIVE POINT WIDTH | INCHES MINIMUM 0.180 AND INCHES MAXIMUM 0.200 |
| ADBM | DRIVE POINT QUANTITY | 8 |
| BZRR | THREAD SERIES | UNF |
| SFTT | SURFACE TREATMENT | OVERALL SILVER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S 2410 |
| ABQU | DRIVE POINT DEPTH | INCHES MINIMUM 0.065 AND INCHES MAXIMUM 0.085 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5616 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 38.0 |
| PRMT | PRECIOUS MATERIAL | SILVER |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| FEAT | SPECIAL FEATURES | DUE TO CRITICAL FEATURES, TOLERANCES, FIT RESTRICTIONS, MATERIAL PROPERTIES AND MANUFACTURING PROCESS. FAILURE COULD RESULT IN LOSS OR SUBSTANTIAL DAMAGE TO WEAPON SYSTEM, DEATH OR SERIOUS INJURY.ACTION ID 45341994 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| AAJD | THREAD CLASS | 3B |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CQJX | NOMINAL THREAD SIZE | INCHES 1.000 |
| CRSQ | COUNTERSINK ANGLE | NUT DEGREES MINIMUM 85.0 AND DEGREES MAXIMUM 95.0 |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 432023 | 77445 |