NSN 5310-00-836-4310 · NIIN 008364310 · FSC 5310
NO DASHES 5310008364310
In Stock
NUT,SELF-LOCKING,HEXAGON
Nuts and Washers
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | NUT FED STD ALL MATERIAL RESPONSES 66 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.551 AND INCHES MAXIMUM 0.566 |
| MATT | MATERIAL | NUT STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 310 OR STEEL COMP 316 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | LOCKING INSERT MIL SPEC SINGLE MATERIAL RESPONSE -IL---20693,CO- A,TY 1 |
| SFTT | SURFACE TREATMENT | NUT PASSIVATE |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT |
| ACTA | NUT STYLE | |
| AZKQ | TEMP RATING | FAHRENHEIT NOMINAL 250.0 |
| BZRR | THREAD SERIES | UNIFIED NATIONAL COARSE (UNC) |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.312 |
| CRSQ | COUNTERSINK ANGLE | NUT DEGREES NOMINAL 88.0 |
| ADEA | NUT HEIGHT | INCHES MINIMUM 0.298 AND INCHES MAXIMUM 0.328 |
| MATT | MATERIAL | LOCKING INSERT PLASTIC POLYHEXAMETHYLENE AMIDE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NUT FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| CRTM | BEARING SURFACE TYPE | CHAMFERED OR WASHER FACED |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 79NTU058 | 72962 |
| MILN24129-4 | 81349 |
| M24129-4-5C | 81349 |
| MS16228-2 | 96906 |
| 79NTU058 | 019L2 |
Supersedes
This item replaces cancelled NIINs 005598037 · 008509274. An older drawing citing one of those numbers resolves here.