NSN 5310-00-877-5798 · NIIN 008775798 · FSC 5310
NO DASHES 5310008775798
In Stock
NUT,SELF-LOCKING,HEXAGON
Nuts and Washers
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | LOCKING INSERT ALUMINUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ACTA | NUT STYLE | |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL EXCEPT INSERT MIL SPEC 1ST TREATMENT RESPONSE -IL-A-8625 AND MIL SPEC 2ND TREATMENT RESPONSE -IL-C-5541 |
| AZKQ | TEMP RATING | FAHRENHEIT NOMINAL 250.0 |
| BZRR | THREAD SERIES | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AAJD | THREAD CLASS | 3B |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.190 |
| MATT | MATERIAL | OVERALL EXCEPT INSERT PLASTIC POLYAMIDE NYLON |
| CRTM | BEARING SURFACE TYPE | CHAMFERED OR WASHER FACED |
| CSXL | BEARING SURFACE FINISH | MICROINCHES 125.0 |
| CRSQ | COUNTERSINK ANGLE | NUT DEGREES NOMINAL 88.0 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT |
| ABAJ | LUBRICATION | SOLUBLE LUBRICANT |
| SFTT | SURFACE TREATMENT | OVERALL EXCEPT INSERT ANODIZE AND CHROMATE |
| ADEA | NUT HEIGHT | INCHES MINIMUM 0.208 AND INCHES MAXIMUM 0.281 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.367 AND INCHES MAXIMUM 0.376 |
Cross-references
14 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 82TV193 | 45152 |
| 10510506 | 56161 |
| 68M02 | 72962 |
| 333-0388-000 | 72962 |
| MS21044D3 | 80205 |
| MS21044D3 | 8K112 |
| 5310PL1384391 | 9009H |
| 5310PL1449472 | 9009H |
| MS21044D3 | 96906 |
| MS20365D1032C | 96906 |
| MS21044D3 | KCV81 |
| 290191 | 06853 |
| MS21044D3 | 0ZBE8 |
| 855268 | 19203 |
Supersedes
This item replaces cancelled NIINs 000503264 · 002079350. An older drawing citing one of those numbers resolves here.