NSN 5310-00-905-3081 · NIIN 009053081 · FSC 5310
NO DASHES 5310009053081
In Stock
NUT,SELF-LOCKING,HEXAGON
Nuts and Washers
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRTM | BEARING SURFACE TYPE | CHAMFERED OR WASHER FACED |
| ADEA | NUT HEIGHT | INCHES MAXIMUM 0.188 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.367 AND INCHES MAXIMUM 0.376 |
| AZKQ | TEMP RATING | FAHRENHEIT NOMINAL 250.0 |
| ACTA | NUT STYLE | |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NUT MIL SPEC 1ST TREATMENT RESPONSE -IL-A-8625 OR MIL SPEC 2ND TREATMENT RESPONSE -IL-C-5541 |
| AAJD | THREAD CLASS | 3B |
| BZRR | THREAD SERIES | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CSXL | BEARING SURFACE FINISH | MICROINCHES 125.0 |
| MATT | MATERIAL | LOCKING INSERT PLASTIC POLYAMIDE NYLON |
| MATT | MATERIAL | NUT ALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 2024 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.190 |
| CRSQ | COUNTERSINK ANGLE | NUT DEGREES NOMINAL 88.0 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| SFTT | SURFACE TREATMENT | NUT ANODIZE OR CHROMATE |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS21083D3 | 27687 |
| MS21083D3 | 80205 |
| NASM25027 | 80205 |
| AN364D1032A | 88044 |
| MS20364D1032A | 96906 |
| MS21083D3 | 96906 |
| 5611-1100 | 0KDP7 |
| 8168007 | 18876 |
Supersedes
This item replaces cancelled NIINs 002752080 · 007217750. An older drawing citing one of those numbers resolves here.