NSN 5310-01-014-8501 · NIIN 010148501 · FSC 5310
NO DASHES 5310010148501
In Stock
NUT,PLAIN,EXTENDED WASHER,HEXAGO
Nuts and Washers
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAVX | WASHER OUTSIDE DIAMETER | INCHES MINIMUM 1.145 AND INCHES MAXIMUM 1.150 |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 0.250 |
| ADEM | WASHER THICKNESS | INCHES NOMINAL 0.100 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.995 AND INCHES MAXIMUM 1.000 |
| BZRR | THREAD SERIES | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 32.0 AND ROCKWELL C MAXIMUM 38.0 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.750 |
| CRSQ | COUNTERSINK ANGLE | NUT DEGREES NOMINAL 45.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
| FEAT | SPECIAL FEATURES | TWO DRIVE POINTS ON WASHER EQUALLY SPACED,0.072 IN. MIN 0.075 IN. MAX DEEP BY 0.250 IN. WIDE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE MATERIAL RESPONSE 08-211,FSC- 24235 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE TREATMENT RESPONSE -3002 FSC- 24235 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 25070 | 24235 |