NSN 5310-01-070-8183 · NIIN 010708183 · FSC 5310
NO DASHES 5310010708183
In Stock
NUT,PLAIN,HEXAGON
Nuts and Washers
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ACTA | NUT STYLE | |
| ADEA | NUT HEIGHT | INCHES MINIMUM 0.146 AND INCHES MAXIMUM 0.166 |
| AGGP | DRILLED HOLE DIAMETER | INCHES MINIMUM 0.045 AND INCHES MAXIMUM 0.055 |
| ALET | HOLE TYPE AND QUANTITY | DRILLED 2 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.367 AND INCHES MAXIMUM 0.376 |
| BZRR | THREAD SERIES | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 19.0 AND ROCKWELL C MAXIMUM 26.0 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.190 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CRSQ | COUNTERSINK ANGLE | NUT DEGREES MINIMUM 85.0 AND DEGREES MAXIMUM 95.0 |
| CRTM | BEARING SURFACE TYPE | WASHER FACED |
| CSXL | BEARING SURFACE FINISH | MICROINCHES 125.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 8740 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6322 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S 2400 |