NSN 5310-01-077-3123 · NIIN 010773123 · FSC 5310
NO DASHES 5310010773123
In Stock
NUT,PLAIN,HEXAGON
Nuts and Washers
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ACTA | NUT STYLE | |
| ADEA | NUT HEIGHT | INCHES MINIMUM 0.115 AND INCHES MAXIMUM 0.135 |
| AGGP | DRILLED HOLE DIAMETER | INCHES MINIMUM 0.034 AND INCHES MAXIMUM 0.039 |
| ALET | HOLE TYPE AND QUANTITY | DRILLED 3 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.377 |
| BZRR | THREAD SERIES | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 34.0 AND ROCKWELL C MAXIMUM 38.0 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.190 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CRTM | BEARING SURFACE TYPE | CHAMFERED |
| CSXL | BEARING SURFACE FINISH | MICROINCHES 125.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 4130 OR STEEL COMP 4340 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-6758,COND D1 OR D4 OR F4 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-5000,COND C1 OR C4 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 2 |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 80205-NAS1423 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| NAS1423-3 | 80205 |
| 5310PL0748739 | 9009H |
| 10122090 | A486G |