NSN 5310-01-091-1237 · NIIN 010911237 · FSC 5310
NO DASHES 5310010911237
In Stock
NUT,PLAIN,SLOTTED,HEXAGON
Nuts and Washers
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ACTA | NUT STYLE | |
| ADEA | NUT HEIGHT | INCHES MINIMUM 0.365 AND INCHES MAXIMUM 0.385 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 1.109 AND INCHES MAXIMUM 1.127 |
| AZKQ | TEMP RATING | FAHRENHEIT MAXIMUM 450.0 |
| BZRR | THREAD SERIES | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 27.0 AND ROCKWELL C MAXIMUM 33.0 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.750 |
| CRSQ | COUNTERSINK ANGLE | NUT DEGREES MINIMUM 109.5 AND DEGREES MAXIMUM 110.5 |
| CRTM | BEARING SURFACE TYPE | WASHER FACED |
| MATT | MATERIAL | OVERALL STEEL |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC ALL TREATMENT RESPONSES QQ--416,TY 2,CL 2 |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 76301-ST3-404 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 93434-12 | 56878 |
| 74640-12 | 56878 |
| E10079-12 | 72962 |
| ST3M404-12 | 76301 |
| BACN10JD112 | 81205 |
| 3D0236-12 | 88277 |
| ST3M404-12 | 92595 |
Supersedes
This item replaces cancelled NIIN 001647799. An older drawing citing one of those numbers resolves here.