NSN 5310-01-103-8840 · NIIN 011038840 · FSC 5310
NO DASHES 5310011038840
In Stock
WASHER,KEY
Nuts and Washers
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.601 AND INCHES MAXIMUM 0.616 |
| ABKV | OUTSIDE DIAMETER | INCHES MINIMUM 0.812 AND INCHES MAXIMUM 0.827 |
| ABLB | INTERNAL PREBENT KEY LENGTH | INCHES MINIMUM 0.062 AND INCHES MAXIMUM 0.093 |
| ABLF | EXTERNAL PREBENT KEY WIDTH | INCHES MINIMUM 0.110 AND INCHES MAXIMUM 0.120 |
| ABLK | INTERNAL PREBENT KEY WIDTH | INCHES MINIMUM 0.110 AND INCHES MAXIMUM 0.120 |
| ABLX | OVERALL DISTANCE INCLUDING KEYS | INCHES MINIMUM 1.0935 AND INCHES MAXIMUM 1.1560 |
| ABMQ | EXTERNAL KEY QUANTITY | 11 |
| ABPX | MATERIAL THICKNESS | INCHES NOMINAL 0.042 |
| CRTL | CRITICALITY CODE JUSTIFICATION | ZZZY |
| HEAT | HEAT TREATMENT | ANNEALED |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE AISI |
| SPCL | SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL--23199 |
| ZZZW | DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY MATERIAL |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS AND CERTIFIED FREE FROM MERCURY CONTAMINATION |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| W-02 | 70413 |
| 928212 | 82328 |
| 1155F20 PIECE 115 | 94259 |
| 928212 | D9182 |
Supersedes
This item replaces cancelled NIIN 011736729. An older drawing citing one of those numbers resolves here.