NSN 5310-01-110-4737 · NIIN 011104737 · FSC 5310
NO DASHES 5310011104737
In Stock
NUT,PLAIN,HEXAGON
Nuts and Washers
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ACTA | NUT STYLE | |
| ADEA | NUT HEIGHT | INCHES NOMINAL 0.406 |
| AGGP | DRILLED HOLE DIAMETER | INCHES MINIMUM 0.046 AND INCHES MAXIMUM 0.050 |
| ALET | HOLE TYPE AND QUANTITY | DRILLED 3 |
| ASDB | WIDTH ACROSS FLATS | INCHES NOMINAL 1.000 |
| BZRR | THREAD SERIES | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.625 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CRSQ | COUNTERSINK ANGLE | NUT DEGREES MINIMUM 89.75 AND DEGREES MAXIMUM 90.25 |
| CRTM | BEARING SURFACE TYPE | CHAMFERED |
| CSXL | BEARING SURFACE FINISH | MICROINCHES 125.0 |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 7075 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-200 TO 11,T73 OR T73510 OR T73511 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 9,T73 OR T7351 |
| SFTT | SURFACE TREATMENT | OVERALL ANODIZE |
Cross-references
14 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 74A450911-2001 | 1935A |
| 74A450911-2001 | 2U518 |
| 74A450911-2001 | 2V343 |
| 74A450911-2001 | 2M490 |
| 74A450911-2001 | 35962 |
| 74A450911-2001 | 32168 |
| 74A450911-2001 | 58078 |
| 74A450911-2001 | 6Z056 |
| 74A450911-2001 | 76301 |
| 74A450911-2001 | 85941 |
| 74A450911-2001 | 9K006 |
| 10122166 | A486G |
| 74A450911-2001 | S5495 |
| 74A450911-2001 | 13002 |