NSN 5310-01-120-3824 · NIIN 011203824 · FSC 5310
NO DASHES 5310011203824
In Stock
NUT,PLAIN,HEXAGON
Nuts and Washers
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ACTA | NUT STYLE | |
| ADEA | NUT HEIGHT | INCHES NOMINAL 0.312 |
| AGGP | DRILLED HOLE DIAMETER | INCHES MINIMUM 0.069 AND INCHES MAXIMUM 0.074 |
| ALET | HOLE TYPE AND QUANTITY | DRILLED 3 |
| ASDB | WIDTH ACROSS FLATS | INCHES NOMINAL 2.060 |
| BZRR | THREAD SERIES | UNIFIED NATIONAL JOINT (UNJ) |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CQJX | NOMINAL THREAD SIZE | INCHES 1.750 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CRSQ | COUNTERSINK ANGLE | BOTH ENDS DEGREES MINIMUM 89.75 AND DEGREES MAXIMUM 90.25 |
| CRTM | BEARING SURFACE TYPE | CHAMFERED |
| CSXL | BEARING SURFACE FINISH | MICROINCHES 125.0 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-8844 CL 3,COND E2 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE TREATMENT RESPONSE STF1750,FSC- 76301 |
Cross-references
17 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 74A410617-2003 | 1935A |
| 74A410617-2003 | 2M290 |
| 74A410617-2003 | 2V343 |
| 74A410617-2003 | 2U518 |
| 74A410617-2003 | 36164 |
| 74A410617-2003 | 32168 |
| 74A410617-2003 | 35962 |
| 74A410617-2003 | 3Z260 |
| 74A410617-2003 | 58078 |
| 74A410617-2003 | 6Z056 |
| 74A410617-2003 | 76301 |
| 74A410617-2003 | 85941 |
| 74A410617-2003 | 9K006 |
| 10109359 | A486G |
| 74A410617-2003 | S5495 |
| 74A410617-2003 | 13002 |
| 74A410617-2003 | 17576 |