NSN 5310-01-121-0385 · NIIN 011210385 · FSC 5310
NO DASHES 5310011210385
In Stock
WASHER,KEY
Nuts and Washers
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.577 AND INCHES MAXIMUM 0.587 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.910 |
| ABLJ | INTERNAL STRAIGHT KEY WIDTH | INCHES MINIMUM 0.110 AND INCHES MAXIMUM 0.120 |
| ABLS | DISTANCE FROM CENTERLINE TO INSIDE OF PREBENT KEY | INCHES NOMINAL 0.530 |
| ABMR | INTERNAL KEY QUANTITY | 2 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.056 AND INCHES MAXIMUM 0.068 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 180000 |
| CRZZ | WIRE HOLE DIAMETER | INCHES MINIMUM 0.062 AND INCHES MAXIMUM 0.067 |
| CSKN | EXTERNAL PREBENT KEY ANGLE | DEGREES NOMINAL 30.0 |
| FEAT | SPECIAL FEATURES | ONE EXTERNAL KEY STRAIGHT SHAPE; INTERNAL KEYS BOTTOM ROUND SURFACE |
| MATT | MATERIAL | OVERALL STEEL COMP 4130 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6758,COND E2 OR MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-18729,COND N |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 74A410582-2001 | 34336 |
| 74A410582-2001 | 50601 |
| 74A410582-2001 | 56540 |
| 74A410582-2001 | 76301 |
| 74A410582-2001 | 9K006 |
| 10109379 | A486G |
| 74A410582-2001 | 13002 |