NSN 5310-01-133-3906 · NIIN 011333906 · FSC 5310
NO DASHES 5310011333906
In Stock
NUT,PLAIN,ROUND
Nuts and Washers
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJE | THREAD PITCH DIAMETERS | INCHES 0.5657 TO 0.5687 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABQU | DRIVE POINT DEPTH | INCHES MINIMUM 0.084 AND INCHES MAXIMUM 0.104 |
| ACTA | NUT STYLE | |
| ACTD | NUT DIAMETER | INCHES MINIMUM 0.985 AND INCHES MAXIMUM 1.005 |
| ADBG | NUT THICKNESS | INCHES MINIMUM 0.303 AND INCHES MAXIMUM 0.323 |
| ADBH | DRIVE POINT WIDTH | INCHES MINIMUM 0.120 AND INCHES MAXIMUM 0.130 |
| ADBM | DRIVE POINT QUANTITY | 4 |
| BZRR | THREAD SERIES | UNS |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.586 |
| MATT | MATERIAL | OVERALL STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 303 PLUS X OR STEEL COMP 303PB OR STEEL COMP 304 OR STEEL COMP 304L |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD ALL MATERIAL RESPONSES AISI |
| SPCL | SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL--23199 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| X20082 | 56231 |
| N-02 | 70413 |
| N-02 | 79568 |
| 905E776 ITEM 44 | 94259 |
| X20082 | 05624 |