NSN 5310-01-147-4910 · NIIN 011474910 · FSC 5310
NO DASHES 5310011474910
In Stock
NUT,PLAIN,ROUND
Nuts and Washers
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJE | THREAD PITCH DIAMETERS | INCHES 6.2028 TO 6.2119 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABQU | DRIVE POINT DEPTH | INCHES NOMINAL 0.281 |
| ACTA | NUT STYLE | |
| ACTD | NUT DIAMETER | INCHES MINIMUM 8.047 AND INCHES MAXIMUM 8.067 |
| ADBG | NUT THICKNESS | INCHES MINIMUM 1.016 AND INCHES MAXIMUM 1.041 |
| ADBH | DRIVE POINT WIDTH | INCHES MINIMUM 0.610 AND INCHES MAXIMUM 0.635 |
| ADBM | DRIVE POINT QUANTITY | 4 |
| BZRR | THREAD SERIES | UNS |
| CMLP | THREAD QUANTITY PER INCH | 8 |
| CQFM | HARDNESS RATING | ROCKWELL B MINIMUM 66.0 AND ROCKWELL B MAXIMUM 92.0 |
| CQJX | NOMINAL THREAD SIZE | INCHES 6.284 |
| CRSQ | COUNTERSINK ANGLE | BOTH ENDS DEGREES MINIMUM 60.0 AND DEGREES MAXIMUM 90.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1031 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1212 OR STEEL COMP 1116 OR STEEL COMP 1117 OR STEEL COMP 1118 OR STEEL COMP 1213 OR STEEL COMP 1215 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD ALL MATERIAL RESPONSES 66 |
| SFTT | SURFACE TREATMENT | OVERALL ZINC AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ-Z-325,TY 2,CL 3 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 1 AND CLASS 2 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-N-21337 | 81349 |
| MS19068-322 | 96906 |