NSN 5310-01-180-7152 · NIIN 011807152 · FSC 5310
NO DASHES 5310011807152
In Stock
NUT,PLAIN,PLATE
Nuts and Washers
Technical characteristics
13 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.098 AND INCHES MAXIMUM 0.103 |
| ADEA | NUT HEIGHT | INCHES MINIMUM 0.318 AND INCHES MAXIMUM 0.333 |
| ADEB | PLATE THICKNESS | INCHES MINIMUM 0.050 AND INCHES MAXIMUM 0.065 |
| ADFP | NUT MOUNTING PROVISION | STRAIGHT HOLES |
| ADFU | MOUNTING HOLE ARRANGEMENT STYLE | |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES MINIMUM 0.396 AND INCHES MAXIMUM 0.400 |
| BZRR | THREAD SERIES | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.250 |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S5735 |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 9116M25P02 | 58828 |
| 9116M25P02E | 07482 |
| 9116M25P02D | 07482 |
| 9116M25P02 | 07482 |
| 9116M25P02A | 07482 |
| 9116M25P02C | 07482 |
| 9116M25P02B | 07482 |
| K49399-4 | 15653 |