NSN 5310-01-185-0584 · NIIN 011850584 · FSC 5310
NO DASHES 5310011850584
In Stock
NUT,PLAIN,ROUND
Nuts and Washers
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJE | THREAD PITCH DIAMETERS | INCHES 0.4487 TO 0.4513 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABQU | DRIVE POINT DEPTH | INCHES NOMINAL 0.0625 |
| ACTA | NUT STYLE | |
| ACTD | NUT DIAMETER | INCHES MINIMUM 0.860 AND INCHES MAXIMUM 0.880 |
| ADBG | NUT THICKNESS | INCHES MINIMUM 0.303 AND INCHES MAXIMUM 0.323 |
| ADBH | DRIVE POINT WIDTH | INCHES MINIMUM 0.120 AND INCHES MAXIMUM 0.130 |
| ADBM | DRIVE POINT QUANTITY | 4 |
| BZRR | THREAD SERIES | UNS |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQFM | HARDNESS RATING | ROCKWELL B MAXIMUM 90.0 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.469 |
| CRSQ | COUNTERSINK ANGLE | BOTH ENDS DEGREES MINIMUM 90.0 AND DEGREES MAXIMUM 120.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD ALL MATERIAL RESPONSES 66 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| NS-01 | 79568 |
| MS19068-013 | 96906 |