NSN 5310-01-244-6891 · NIIN 012446891 · FSC 5310
NO DASHES 5310012446891
In Stock
NUT,SELF-LOCKING,SPLINE
Nuts and Washers
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE ALL METAL DESIGN |
| AAVL | PILOT DIAMETER | INCHES MAXIMUM 0.270 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.192 |
| ABAJ | LUBRICATION | DRY FILM LUBRICANT |
| ACTA | NUT STYLE | |
| ACVN | NUT LENGTH | INCHES MAXIMUM 0.587 |
| ADEA | NUT HEIGHT | INCHES NOMINAL 0.462 |
| ASDB | WIDTH ACROSS FLATS | INCHES MAXIMUM 0.405 |
| AZKQ | TEMP RATING | FAHRENHEIT NOMINAL 450.0 |
| BZRR | THREAD SERIES | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQFM | HARDNESS RATING | ROCKWELL C MAXIMUM 49.0 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.1900 |
| CRSQ | COUNTERSINK ANGLE | FIRST END DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| MATT | MATERIAL | BOSS STEEL COMP 304 OR STEEL COMP 305 |
| MATT | MATERIAL | NUT STEEL COMP 1050 OR STEEL COMP 4130 |
| MATT | MATERIAL | BRACKET STEEL COMP 1050 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BRACKET ASSN STD SINGLE MATERIAL RESPONSE A-S 5085 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BOSS ASSN STD 1ST MATERIAL RESPONSE A-S 5639 OR ASSN STD 2ND MATERIAL RESPONSE A-S 5514 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | NUT ASSN STD 1ST MATERIAL RESPONSE A-S 5085 OR ASSN STD 2ND MATERIAL RESPONSE A-S 6351 |
| SFTT | SURFACE TREATMENT | BRACKET CADMIUM AND CHROMATE |
| SFTT | SURFACE TREATMENT | BOSS CADMIUM AND CHROMATE |
| SFTT | SURFACE TREATMENT | NUT CADMIUM OR CADMIUM OR CHROMATE OR CADMIUM OR PHOSPHATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NUT FED SPEC SINGLE TREATMENT RESPONSE QQ--416 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BOSS FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 2 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BRACKET FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 2 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS14200-3-10 | 80205 |
| FF6010L-10-D | 97928 |
| MS14200-3-10 | 96906 |
| FFN6010-10D | 97928 |
| 906452-002 | 05257 |
| FF6010L-10-D | 0HDW7 |
| FFN6010-10D | 0HDW7 |
Supersedes
This item replaces cancelled NIINs 002407652 · 012570727. An older drawing citing one of those numbers resolves here.