NSN 5310-01-283-7623 · NIIN 012837623 · FSC 5310
NO DASHES 5310012837623
In Stock
WASHER,FLAT
Nuts and Washers
Application: MRAP - COMMON NSN - USED ON 3 MRAP VARIANTS AND 5 OTHER WEAPON SYSTEMS; MRAP MAXXPRO DASH ISS W/OGPK AND W/CROWS
Technical characteristics
12 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.344 |
| ABMW | PERIPHERAL SHAPE STYLE | |
| ABMX | CENTER HOLE SHAPE STYLE | |
| ABNM | THICKNESS | INCHES NOMINAL 0.089 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 0.688 |
| AGAV | END ITEM IDENTIFICATION | MRAP - COMMON NSN - USED ON 3 MRAP VARIANTS AND 5 OTHER WEAPON SYSTEMS; MRAP MAXXPRO DASH ISS W/OGPK AND W/CROWS |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | HARDENED WASHER |
| FEAT | SPECIAL FEATURES | STEEL 1040 TO 1065 PER CEMS A-0, PART 1, QUENCHED AND TEMPERED TO RE36 TO 42; THESE WASHERS ARE INTENDED FOR USE IN HOGH CLAMPING LOADS, TO MINIMIZE EMBEDDING , AND TO AID TORQUING |
| MATT | MATERIAL | OVERALL STEEL |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL ZINC |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| ESP-F-16.104-PP | 338X5 |
| 25708R1 | 338X5 |
| ESP-F-16.101-GS | 338X5 |
| 015-90015-21 | 59556 |
| 25708R1 | 5F5P2 |
| 25708R1 | 89346 |
| 25708R1 | Z0009 |
Supersedes
This item replaces cancelled NIINs 015744815 · 015565383. An older drawing citing one of those numbers resolves here.