NSN 5310-01-292-5343 · NIIN 012925343 · FSC 5310
NO DASHES 5310012925343
In Stock
NUT,SELF-LOCKING,SPLINE
Nuts and Washers
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.264 AND INCHES MAXIMUM 0.270 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.440 |
| ABAJ | LUBRICATION | DRY FILM LUBRICANT |
| ACTA | NUT STYLE | |
| ACVN | NUT LENGTH | INCHES MINIMUM 0.547 AND INCHES MAXIMUM 0.582 |
| ADEA | NUT HEIGHT | INCHES MINIMUM 0.658 AND INCHES MAXIMUM 0.688 |
| ASDB | WIDTH ACROSS FLATS | INCHES NOMINAL 0.390 |
| BZRR | THREAD SERIES | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CBBL | FEATURES PROVIDED | FLOATING NUT |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 40.0 AND ROCKWELL C MAXIMUM 50.0 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.190 |
| FEAT | SPECIAL FEATURES | HARDNESS RATING APPLIES TO THE BRACKET ONLY; THE NUT HAS A 160 KSI MIN TENSILE STRENGTH |
| MATT | MATERIAL | NUT STEEL COMP 1075 OR STEEL COMP 1050 |
| MATT | MATERIAL | BRACKET STEEL COMP 1050 |
| MATT | MATERIAL | SHELL STEEL COMP 304 OR STEEL COMP 305 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SHELL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-23195 OR ASSN STD 1ST MATERIAL RESPONSE A-S 5639 OR ASSN STD 2ND MATERIAL RESPONSE A-S 5514 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BRACKET ASSN STD SINGLE MATERIAL RESPONSE A-S 5085 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | NUT FED SPEC 1ST MATERIAL RESPONSE QQ-S-777 OR ASSN STD 2ND MATERIAL RESPONSE A-S 5085 |
| SFTT | SURFACE TREATMENT | SHELL PASSIVATE AND CADMIUM |
| SFTT | SURFACE TREATMENT | BRACKET CADMIUM |
| SFTT | SURFACE TREATMENT | NUT CADMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SHELL FED SPEC 1ST TREATMENT RESPONSE QQ--35 AND FED SPEC 2ND TREATMENT RESPONSE QQ--416,TY 2,CL 2 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NUT FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 2 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BRACKET FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 2 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| FT5195-10-12-1P | 58794 |
| FT5195-10-M-1 | 58794 |
| C7592A3M1 | 81755 |
| C7592A3M1 | 97393 |
| SL3469-3M1 | 97393 |
| FGD6010L10-M-1 | 97928 |
| FGD6010L10-M-1 | 0HDW7 |