ATLASAir Supply

321-252-9430Mon–Fri · 8a–6p ET
Quote0 Request a Quote →
Home / MS parts / Fasteners & Fastening Hardware / NSN 5310-01-331-3802
NSN 5310-01-331-3802  ·  NIIN 013313802  ·  FSC 5310
NO DASHES 5310013313802
In Stock

NUT,SELF-LOCKING,PLATE

Nuts and Washers

Technical characteristics

35 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

MRCRequirementValue
AAJDTHREAD CLASS3B
AAJFTHREAD DIRECTIONRIGHT-HAND
AAUMLOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGN
ABAJLUBRICATIONDRY FILM LUBRICANT
ABTBMOUNTING HOLE DIAMETERINCHES MINIMUM 0.098
ACTANUT STYLE
ACVNNUT LENGTHINCHES NOMINAL 0.990
ADEANUT HEIGHTINCHES MAXIMUM 0.320
ADEBPLATE THICKNESSINCHES NOMINAL 0.020
ADECPLATE WIDTHINCHES MAXIMUM 0.570
ADFPNUT MOUNTING PROVISIONSTRAIGHT HOLES
ADFUMOUNTING HOLE ARRANGEMENT STYLE
ADFWDISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTERINCHES MINIMUM 0.339 AND INCHES MAXIMUM 0.349
ADFYCENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTHINCHES MINIMUM 0.686 AND INCHES MAXIMUM 0.690
AZKQTEMP RATINGFAHRENHEIT MAXIMUM 450.0
BZRRTHREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
CBBLFEATURES PROVIDEDFLOATING NUT
CMLPTHREAD QUANTITY PER INCH32
CQJXNOMINAL THREAD SIZEINCHES 0.190
FEATSPECIAL FEATURESCOLOR SEAL RED
MATTMATERIALBASE IRON ALLOY 660
MATTMATERIALSEAL RUBBER SILICONE CLASS Q
MATTMATERIALSHELL IRON ALLOY 660
MATTMATERIALNUT IRON ALLOY 660
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONSEAL ASSN STD SINGLE MATERIAL RESPONSE A-S 3304
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONBASE ASSN STD SINGLE MATERIAL RESPONSE A-S 5525
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONSHELL ASSN STD SINGLE MATERIAL RESPONSE A-S 5525
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONNUT ASSN STD SINGLE MATERIAL RESPONSE A-S 5525
SFTTSURFACE TREATMENTNUT PASSIVATE
SFTTSURFACE TREATMENTBASE PASSIVATE
SFTTSURFACE TREATMENTSHELL PASSIVATE
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONNUT FED SPEC SINGLE TREATMENT RESPONSE QQ--35
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONBASE FED SPEC SINGLE TREATMENT RESPONSE QQ--35
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONSHELL FED SPEC SINGLE TREATMENT RESPONSE QQ--35
ZZZKSPECIFICATION/STANDARD DATAMANUFACTURERS STANDARD 81205-BACN10JZ

Cross-references

8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.

Manufacturer part numberCAGE
NS103224SEA-0256878
F39044-362554
109F9221-372962
BACN10JZ3A4CM81205
NS103224SEA-0280539
BACN10JZ3A4CMU81205
F39044-3BAC15635
F39044-315653