NSN 5310-01-424-2382 · NIIN 014242382 · FSC 5310
NO DASHES 5310014242382
In Stock
NUT,PLAIN,ROUND
Nuts and Washers
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABQU | DRIVE POINT DEPTH | INCHES NOMINAL 0.094 |
| ACTA | NUT STYLE | |
| ACTD | NUT DIAMETER | INCHES MINIMUM 1.579 AND INCHES MAXIMUM 1.599 |
| ADBG | NUT THICKNESS | INCHES MINIMUM 0.240 AND INCHES MAXIMUM 0.260 |
| ADBH | DRIVE POINT WIDTH | INCHES MINIMUM 0.178 AND INCHES MAXIMUM 0.198 |
| ADBM | DRIVE POINT QUANTITY | 8 |
| BZRR | THREAD SERIES | UNEF |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 26.0 AND ROCKWELL C MAXIMUM 32.0 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.938 |
| CRSQ | COUNTERSINK ANGLE | BOTH ENDS DEGREES MINIMUM 90.0 AND DEGREES MAXIMUM 120.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 |
| SFTT | SURFACE TREATMENT | OVERALL PHOSPHATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE DOD--16232 TYZ CL3 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 752-6406838-101 | 53711 |
| MIL-N-21337 | 81349 |
| MS27955-8 | 96906 |
| MS27955-8 | D9182 |