NSN 5310-01-442-1111 · NIIN 014421111 · FSC 5310
NO DASHES 5310014421111
In Stock
NUT,SELF-LOCKING,HEXAGON
Nuts and Washers
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT |
| AAWY | COUNTERBORE DIAMETER | FIRST END INCHES MINIMUM 1.798 AND INCHES MAXIMUM 1.838 |
| ACTA | NUT STYLE | |
| ADEA | NUT HEIGHT | INCHES MINIMUM 2.250 AND INCHES MAXIMUM 2.376 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 2.715 AND INCHES MAXIMUM 2.766 |
| AZKQ | TEMP RATING | FAHRENHEIT NOMINAL 250.0 |
| BZRR | THREAD SERIES | UNIFIED NATIONAL COARSE (UNC) |
| CMLP | THREAD QUANTITY PER INCH | 5 |
| CQJX | NOMINAL THREAD SIZE | INCHES 1.750 |
| CRSQ | COUNTERSINK ANGLE | SECOND END DEGREES MINIMUM 88.0 |
| CRTM | BEARING SURFACE TYPE | CHAMFERED OR WASHER FACED |
| FEAT | SPECIAL FEATURES | NICKEL ALLOY 400 IS CLASS A AND NICKEL ALLOY 405 IS CLASS B |
| MATT | MATERIAL | OVERALL EXCEPT INSERT NICKEL ALLOY 400 OR NICKEL ALLOY R-405 |
| MATT | MATERIAL | LOCKING INSERT PLASTIC POLYAMIDE NYLON |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL EXCEPT INSERT FED SPEC SINGLE MATERIAL RESPONSE QQ-N-281 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MS17828-28C | 53711 |
| 563-6404328 FIND 63 | 53711 |
| MS17828-28C | 80205 |
| MS17828-28C | 96906 |