NSN 5310-01-625-2012 · NIIN 016252012 · FSC 5310
NO DASHES 5310016252012
In Stock
NUT,PLAIN,ROUND
Nuts and Washers
Application: DRAGONSPEAR
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BZRR | THREAD SERIES | UN |
| AGGP | DRILLED HOLE DIAMETER | INCHES NOMINAL 0.3125 |
| ALET | HOLE TYPE AND QUANTITY | TAPPED 3 |
| ADBM | DRIVE POINT QUANTITY | 4 |
| AGAV | END ITEM IDENTIFICATION | DRAGONSPEAR |
| ADBJ | UNDERCUT THICKNESS | INCHES NOMINAL 1.200 |
| AAJD | THREAD CLASS | 2B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABAJ | LUBRICATION | DRY FILM LUBRICANT |
| ACTA | NUT STYLE | |
| ACTD | NUT DIAMETER | INCHES NOMINAL 6.000 |
| ADBH | DRIVE POINT WIDTH | INCHES NOMINAL 0.250 |
| CMLP | THREAD QUANTITY PER INCH | 4 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 35.0 AND ROCKWELL C MAXIMUM 40.0 |
| CQJX | NOMINAL THREAD SIZE | INCHES 5.750 |
| CQTW | HOLE THREAD QUANTITY PER INCH | 18 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | NUT, COLLET, GUN BOX |
| FEAT | SPECIAL FEATURES | TENSILE STRENGTH 160-180KSI |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL NATIONAL SPEC SINGLE MATERIAL RESPONSE AST- A322 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL PHOSPHATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST TREATMENT RESPONSE -IL-DTL-16232, TY Z, CL III AND MIL SPEC 2ND TREATMENT RESPONSE -IL-L-46010 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 94387 | 07609 |