NSN 5310-01-717-4026 · NIIN 017174026 · FSC 5310
NO DASHES 5310017174026
In Stock
NUT ASSEMBLY,RETAINER PLATE
Nuts and Washers
Application: 30MM GUN
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2B |
| ALET | HOLE TYPE AND QUANTITY | DRILLED 1 AND TAPPED 1 |
| BZRR | THREAD SERIES | UNF |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.375 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | INTERNAL BEAM NUT PLATE |
| FEAT | SPECIAL FEATURES | THE SURFACE TREATMENT SHOULD BE HEAT TREATED IAW AMS-H-6875A OR AMS2759/1; FINAL PRODUCT SHALL HAVE A HARDNESS OF RHC 35-40; ELECTROLESS NICKEL-BORON COATING IAW ASTM B607(2015),TYPE 2,CLASS2,MAXIMUM COATING THICKNESS IS 0.0005 INCHES; ALTN COATING: ZINC NICKEL ALLOY IAW AMS-2417, TYPE 2; ALL DIMENSIONS APPLY AFTER COATING IS APPLIED. |
| MATT | MATERIAL | OVERALL STEEL COMP 4340 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL DEF STAN/SPEC SINGLE MATERIAL RESPONSE DOD-STD-2101 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL NICKEL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL DEF STAN/SPEC SINGLE TREATMENT RESPONSE DOD-STD-2101 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABHC | OVERALL WIDTH | INCHES MINIMUM 0.870 AND INCHES MAXIMUM 0.880 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.450 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 0.415 AND INCHES MAXIMUM 0.425 |
| ADAZ | THRU-HOLE DIAMETER | INCHES MINIMUM 0.249 AND INCHES MAXIMUM 0.256 |
| AGAV | END ITEM IDENTIFICATION | 30MM GUN |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 120640 | 07609 |