NSN 5310-00-857-4957 · NIIN 008574957 · FSC 5310
NO DASHES 5310008574957
In Stock
NUT,SELF-LOCKING,HEXAGON
Nuts and Washers
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRTM | BEARING SURFACE TYPE | CHAMFERED OR WASHER FACED |
| ADEA | NUT HEIGHT | INCHES MINIMUM 0.318 AND INCHES MAXIMUM 0.469 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | NUT FED SPEC 1ST MATERIAL RESPONSE QQ-A-200 TO 2,T6 OR FED SPEC 2ND MATERIAL RESPONSE QQ-A-225 TO 5,T4 OR FED SPEC 3RD MATERIAL RESPONSE QQ-A-225 TO 6,T6 OR FED SPEC 4TH MATERIAL RESPONSE QQ-A-200 TO 11,T6 |
| SFTT | SURFACE TREATMENT | OVERALL EXCEPT INSERT ANODIZE |
| CSXL | BEARING SURFACE FINISH | MICROINCHES 125.0 |
| BZRR | THREAD SERIES | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.375 |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL EXCEPT INSERT MIL SPEC SINGLE TREATMENT RESPONSE -IL-A-8625 |
| AZKQ | TEMP RATING | FAHRENHEIT NOMINAL 250.0 |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.553 AND INCHES MAXIMUM 0.564 |
| ABAJ | LUBRICATION | SOLUBLE LUBRICANT |
| ACTA | NUT STYLE | |
| CRSQ | COUNTERSINK ANGLE | NUT DEGREES NOMINAL 88.0 |
| MATT | MATERIAL | NUT ALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 2017 OR ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 7075 |
Supersedes
This item replaces cancelled NIINs 000503355 · 010833238. An older drawing citing one of those numbers resolves here.