NSN 5310-00-950-5922 · NIIN 009505922 · FSC 5310
NO DASHES 5310009505922
In Stock
NUT,PLAIN,HEXAGON
Nuts and Washers
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ADEA | NUT HEIGHT | INCHES MINIMUM 0.381 AND INCHES MAXIMUM 0.401 |
| CMLP | THREAD QUANTITY PER INCH | 14 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.875 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CRSQ | COUNTERSINK ANGLE | NUT DEGREES MINIMUM 105.0 AND DEGREES MAXIMUM 115.0 |
| AAJD | THREAD CLASS | 3B |
| ACTA | NUT STYLE | |
| AAWY | COUNTERBORE DIAMETER | NUT INCHES MINIMUM 1.040 AND INCHES MAXIMUM 1.050 |
| ALET | HOLE TYPE AND QUANTITY | DRILLED 2 |
| ADFK | NUT COUNTERBORE DEPTH | NUT INCHES MINIMUM 0.049 AND INCHES MAXIMUM 0.059 |
| CRTM | BEARING SURFACE TYPE | CHAMFERED OR WASHER FACED |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 1.114 AND INCHES MAXIMUM 1.127 |
| CSXL | BEARING SURFACE FINISH | MICROINCHES 63.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 304 |
| BZRR | THREAD SERIES | UNF |
| AGGP | DRILLED HOLE DIAMETER | INCHES NOMINAL 0.062 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5639 |