NSN 5315-00-001-5335 · NIIN 000015335 · FSC 5315
NO DASHES 5315000015335
In Stock
PIN,STRAIGHT,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSYM | SURFACE FINISH | BOTH ENDS MICROINCHES 125.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 416 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-764,TYE 416 |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | INCHES NOMINAL 0.050 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER MICROINCHES 16.0 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 40.0 AND ROCKWELL C MAXIMUM 45.0 |
| ABRF | CENTER TO CENTER DISTANCE BETWEEN HOLES | INCHES MINIMUM 0.460 AND INCHES MAXIMUM 0.470 |
| ACHT | PIN OVERALL LENGTH | INCHES MINIMUM 0.570 AND INCHES MAXIMUM 0.580 |
| ACHU | PIN OVERALL DIAMETER | INCHES MINIMUM 0.1970 AND INCHES MAXIMUM 0.1972 |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| AAGZ | FIRST END STYLE | |
| ABRB | HOLE ARRANGEMENT STYLE | |
| ABRC | FIRST HOLE DIAMETER | INCHES MINIMUM 0.045 AND INCHES MAXIMUM 0.050 |
| ABRD | SECOND HOLE DIAMETER | INCHES MINIMUM 0.045 AND INCHES MAXIMUM 0.050 |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.020 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE TREATMENT RESPONSE WS10012,79294 |