NSN 5315-00-032-1618 · NIIN 000321618 · FSC 5315
NO DASHES 5315000321618
In Stock
PIN,SHOULDER,HEADED
Nails, Machine Keys, and Pins
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AASK | HEAD STYLE | |
| ABPB | UNDER HEAD LENGTH | INCHES MINIMUM 0.870 AND INCHES MAXIMUM 0.910 |
| ABPR | FIRST STEP DIAMETER | INCHES MINIMUM 0.200 AND INCHES MAXIMUM 0.220 |
| ABPS | FIRST STEP LENGTH | INCHES MINIMUM 0.625 AND INCHES MAXIMUM 0.655 |
| ABPT | SECOND STEP DIAMETER | INCHES MINIMUM 0.149 AND INCHES MAXIMUM 0.151 |
| ABPU | SECOND STEP LENGTH | INCHES MINIMUM 0.235 AND INCHES MAXIMUM 0.265 |
| AMCS | FIRST END TAPER LENGTH | INCHES MINIMUM 0.020 AND INCHES MAXIMUM 0.040 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 35.0 |
| CRMG | FIRST END TAPER ANGLE | DEGREES MINIMUM 43.0 AND DEGREES MAXIMUM 47.0 |
| CRRG | PIN HEAD DIAMETER | INCHES MINIMUM 0.248 AND INCHES MAXIMUM 0.249 |
| CTPW | HEAD COUNTERSINK ANGLE | DEGREES MINIMUM 35.0 AND DEGREES MAXIMUM 45.0 |
| HGTH | HEIGHT | INCHES MINIMUM 0.125 AND INCHES MAXIMUM 0.155 |
| MATT | MATERIAL | OVERALL STEEL COMP 410 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5613 |
| STYL | STYLE DESIGNATOR |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 181591 | 77445 |