NSN 5315-00-094-7251 · NIIN 000947251 · FSC 5315
NO DASHES 5315000947251
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.485 AND INCHES MAXIMUM 0.505 |
| AATR | SHANK LENGTH | INCHES MINIMUM 0.450 AND INCHES MAXIMUM 0.480 |
| AAVJ | SHOULDER WIDTH ACROSS FLATS | INCHES NOMINAL 0.563 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.308 AND INCHES MAXIMUM 0.310 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.445 AND INCHES MAXIMUM 1.465 |
| CTTF | SECOND END OUTER RADIUS | INCHES MINIMUM 0.130 AND INCHES MAXIMUM 0.190 |
| CWAS | SECOND SHANK LENGTH | INCHES MINIMUM 0.840 AND INCHES MAXIMUM 0.900 |
| MATT | MATERIAL | OVERALL STEEL COMP 4130 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6758 TY 1 |
| SFTT | SURFACE TREATMENT | OVERALL PHOSPHATE MANGANESE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-16232 TY 1 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CRDY | FIRST END LOCATION | LONG END |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.375 |
| CQTR | SECOND SHANK DIAMETER | INCHES MINIMUM 0.371 AND INCHES MAXIMUM 0.374 |
| AMCS | FIRST END TAPER LENGTH | INCHES MINIMUM 0.037 AND INCHES MAXIMUM 0.057 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 21007 | 77646 |