NSN 5315-00-115-6846 · NIIN 001156846 · FSC 5315
NO DASHES 5315001156846
In Stock
PIN,STRAIGHT,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.020 |
| ACHT | PIN OVERALL LENGTH | INCHES NOMINAL 1.320 |
| ACHU | PIN OVERALL DIAMETER | INCHES MINIMUM 0.1865 AND INCHES MAXIMUM 0.1885 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7097 |
| ABRB | HOLE ARRANGEMENT STYLE | |
| ABRC | FIRST HOLE DIAMETER | INCHES MINIMUM 0.061 AND INCHES MAXIMUM 0.065 |
| ABRD | SECOND HOLE DIAMETER | INCHES MINIMUM 0.061 AND INCHES MAXIMUM 0.065 |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | INCHES MINIMUM 0.089 AND INCHES MAXIMUM 0.099 |
| ABRF | CENTER TO CENTER DISTANCE BETWEEN HOLES | INCHES MINIMUM 1.091 AND INCHES MAXIMUM 1.111 |
| AAGZ | FIRST END STYLE | |
| MATT | MATERIAL | OVERALL STEEL COMP 1018 OR STEEL COMP 1020 OR STEEL COMP 1025 |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER MICROINCHES 63.0 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 58.0 AND ROCKWELL C MAXIMUM 62.0 |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 60-302 | 01359 |