NSN 5315-00-138-6136 · NIIN 001386136 · FSC 5315
NO DASHES 5315001386136
In Stock
PIN,GROOVED,HEADED
Nails, Machine Keys, and Pins
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AASK | HEAD STYLE | |
| ABMZ | DIAMETER | INCHES MINIMUM 0.1903 AND INCHES MAXIMUM 0.1905 |
| ABNZ | EFFECTIVE LENGTH | INCHES NOMINAL 0.567 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.160 AND INCHES MAXIMUM 0.180 |
| ABPB | UNDER HEAD LENGTH | INCHES MINIMUM 0.699 AND INCHES MAXIMUM 0.719 |
| ABPC | UNDERCUT WIDTH | INCHES MAXIMUM 0.025 |
| ABRB | HOLE ARRANGEMENT STYLE | |
| ABRC | FIRST HOLE DIAMETER | INCHES MINIMUM 0.073 AND INCHES MAXIMUM 0.083 |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | INCHES NOMINAL 0.101 |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.020 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.603 AND INCHES MAXIMUM 0.613 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 44.0 AND ROCKWELL C MAXIMUM 62.0 |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CRRG | PIN HEAD DIAMETER | INCHES MINIMUM 0.271 AND INCHES MAXIMUM 0.291 |
| CSYM | SURFACE FINISH | LONG SHANK MICROINCHES 32.0 |
| HGTH | HEIGHT | INCHES MINIMUM 0.104 AND INCHES MAXIMUM 0.114 |
| MATT | MATERIAL | OVERALL STEEL COMP E52100 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7420 OR ASSN STD SINGLE MATERIAL RESPONSE A-S6440 |
| STYL | STYLE DESIGNATOR |