NSN 5315-00-177-1346 · NIIN 001771346 · FSC 5315
NO DASHES 5315001771346
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AAHP | SECOND END STYLE | |
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 1.000 |
| AATR | SHANK LENGTH | INCHES MINIMUM 4.611 AND INCHES MAXIMUM 4.621 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.558 AND INCHES MAXIMUM 0.560 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.309 AND INCHES MAXIMUM 0.311 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 7.700 |
| AKTN | SECOND END SLOT WIDTH | INCHES MINIMUM 0.093 AND INCHES MAXIMUM 0.098 |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.010 |
| AMGR | SECOND END SLOT DEPTH | INCHES MINIMUM 0.051 AND INCHES MAXIMUM 0.056 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.375 |
| CRDY | FIRST END LOCATION | SHANK END |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CSYM | SURFACE FINISH | SHANK END MICROINCHES 90.0 |
| FEAT | SPECIAL FEATURES | 0.030 IN. W 0.290 IN. DIA UNDERCUT LOCATED 0.125 IN. FROM SHANK END |
| MATT | MATERIAL | OVERALL STEEL COMP 302 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7720 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 65403-07010-101 | 29214 |
| 65403-07010-101 | 2A269 |
| 65403-07010-101 | 54878 |
| 65403-07010-101 | 78286 |
| 65403-07010-101 | D1081 |