NSN 5315-00-209-7594 · NIIN 002097594 · FSC 5315
NO DASHES 5315002097594
In Stock
PIN,GROOVED,HEADED
Nails, Machine Keys, and Pins
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| STYL | STYLE DESIGNATOR | |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD 1ST TREATMENT RESPONSE A-S 2400 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM OR PHOSPHATE |
| CSYM | SURFACE FINISH | OUTSIDE DIAMETER MICROINCHES 32.0 |
| HGTH | HEIGHT | INCHES MINIMUM 0.016 AND INCHES MAXIMUM 0.048 |
| MATT | MATERIAL | OVERALL STEEL COMP 1018 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-W-633 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.030 AND INCHES MAXIMUM 0.034 |
| ABPB | UNDER HEAD LENGTH | INCHES MINIMUM 0.744 AND INCHES MAXIMUM 0.754 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.147 AND INCHES MAXIMUM 0.149 |
| AASK | HEAD STYLE | |
| ABMZ | DIAMETER | INCHES MINIMUM 0.186 AND INCHES MAXIMUM 0.187 |
| ABNZ | EFFECTIVE LENGTH | INCHES MINIMUM 0.222 AND INCHES MAXIMUM 0.232 |
| CBBL | FEATURES PROVIDED | CASE-HARDENED |
| CRMG | FIRST END TAPER ANGLE | DEGREES MINIMUM 40.0 AND DEGREES MAXIMUM 50.0 |
| CRRG | PIN HEAD DIAMETER | INCHES MINIMUM 0.234 AND INCHES MAXIMUM 0.266 |
| CSYM | SURFACE FINISH | ALL OTHER SURFACES MICROINCHES 63.0 |
| AAGZ | FIRST END STYLE | |
| AMCS | FIRST END TAPER LENGTH | INCHES MINIMUM 0.010 AND INCHES MAXIMUM 0.020 |
| ABPF | SECOND UNDERCUT DIAMETER | INCHES MINIMUM 0.178 AND INCHES MAXIMUM 0.182 |
| ABPD | SECOND UNDERCUT WIDTH | INCHES NOMINAL 0.020 |