NSN 5315-00-290-1344 · NIIN 002901344 · FSC 5315
NO DASHES 5315002901344
In Stock
PIN,GROOVED,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRDY | FIRST END LOCATION | BOTH ENDS |
| AAHP | SECOND END STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.159 |
| ABNZ | EFFECTIVE LENGTH | INCHES NOMINAL 1.001 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.203 AND INCHES MAXIMUM 0.228 |
| CTHC | SECOND END TAPER ANGLE | DEGREES MINIMUM 43.0 AND DEGREES MAXIMUM 47.0 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL SUPERFICIAL 15-N MINIMUM 89.0 AND ROCKWELL SUPERFICIAL 15-N MAXIMUM 91.0 |
| CQFX | PIN SMALL END DIAMETER | INCHES MINIMUM 0.177 AND INCHES MAXIMUM 0.187 |
| AAGZ | FIRST END STYLE | |
| MATT | MATERIAL | OVERALL STEEL |
| CBBL | FEATURES PROVIDED | CASE-HARDENED |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CRMG | FIRST END TAPER ANGLE | DEGREES MINIMUM 43.0 AND DEGREES MAXIMUM 47.0 |
| CSCG | PIN LARGE END DIAMETER | INCHES MINIMUM 0.294 AND INCHES MAXIMUM 0.297 |
| AMFM | SECOND END TAPER LENGTH | INCHES MINIMUM 0.016 AND INCHES MAXIMUM 0.047 |
| ABPK | INTERMEDIATE DIAMETER | INCHES MINIMUM 0.2444 AND INCHES MAXIMUM 0.2450 |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.016 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.047 AND INCHES MAXIMUM 0.078 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 003160639. An older drawing citing one of those numbers resolves here.