NSN 5315-00-290-6270 · NIIN 002906270 · FSC 5315
NO DASHES 5315002906270
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| STYL | STYLE DESIGNATOR | |
| AAGZ | FIRST END STYLE | |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.552 AND INCHES MAXIMUM 0.572 |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| MATT | MATERIAL | OVERALL STEEL |
| AAJD | THREAD CLASS | 3A |
| AATR | SHANK LENGTH | INCHES MINIMUM 0.552 AND INCHES MAXIMUM 0.572 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.624 AND INCHES MAXIMUM 0.625 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.3684 AND INCHES MAXIMUM 0.375 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.490 AND INCHES MAXIMUM 1.510 |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.031 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 28.0 AND ROCKWELL C MAXIMUM 32.0 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.375 |
| CRDY | FIRST END LOCATION | BOTH ENDS |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-890,ALLOY NO.3 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3235060 | 55380 |
| 3213188 | 55380 |
| 3235060 | 72915 |
| 3213188 | 72915 |
| AS11S41-0307 ALT1 PC-8 | 80064 |
| SS212S41-031PC8 | 80064 |
| AS11S41-0307PC8 | 80064 |
| SS212S41-033PC8 | 80064 |
| SS198S41-034PC8 | 80064 |
| 81127S41-25402ALT3PC2 | 80064 |
| 81127S41-20402ALT3PC2 | 80064 |
Supersedes
This item replaces cancelled NIIN 003641820. An older drawing citing one of those numbers resolves here.