NSN 5315-00-291-2061 · NIIN 002912061 · FSC 5315
NO DASHES 5315002912061
In Stock
PIN,GROOVED,HEADED
Nails, Machine Keys, and Pins
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.5501 AND INCHES MAXIMUM 0.5506 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.5601 AND INCHES MAXIMUM 0.5606 |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | INCHES MINIMUM 0.500 |
| AASK | HEAD STYLE | |
| ABNZ | EFFECTIVE LENGTH | INCHES NOMINAL 1.330 |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 30.0 |
| CRRG | PIN HEAD DIAMETER | INCHES NOMINAL 0.800 |
| CSYM | SURFACE FINISH | OVERALL MICROINCHES 63.0 |
| HGTH | HEIGHT | INCHES NOMINAL 0.120 |
| MATT | MATERIAL | OVERALL STEEL COMP 416 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-764,COND A |
| STYL | STYLE DESIGNATOR | |
| ANEE | GRIP LENGTH | INCHES NOMINAL 1.400 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 38.0 AND ROCKWELL C MAXIMUM 43.0 |
| ABPB | UNDER HEAD LENGTH | INCHES NOMINAL 1.900 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.060 |
| ABRB | HOLE ARRANGEMENT STYLE | |
| ABRC | FIRST HOLE DIAMETER | INCHES MINIMUM 0.141 AND INCHES MAXIMUM 0.144 |
| AAGZ | FIRST END STYLE | |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.036 |