NSN 5315-00-311-1840 · NIIN 003111840 · FSC 5315
NO DASHES 5315003111840
In Stock
PIN,SHOULDER,HEADLESS
Nails, Machine Keys, and Pins
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRDY | FIRST END LOCATION | BOTH ENDS |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CWAS | SECOND SHANK LENGTH | INCHES NOMINAL 0.1093 |
| AATR | SHANK LENGTH | INCHES MINIMUM 0.3908 AND INCHES MAXIMUM 0.4008 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.245 AND INCHES MAXIMUM 0.2480 |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 41.0 |
| CQTR | SECOND SHANK DIAMETER | INCHES MINIMUM 0.1990 AND INCHES MAXIMUM 0.2020 |
| AAGZ | FIRST END STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 0.6718 |
| AMCS | FIRST END TAPER LENGTH | INCHES NOMINAL 0.015 |
| STYL | STYLE DESIGNATOR | |
| FEAT | SPECIAL FEATURES | SMALLER DIA SHANK TAPERED 0.156 IN. LG FROM END OF SHOULDER TO 0.150 IN. MIN TO 0.153 IN. MAX DIA AND ONE 0.096 IN. DIA DRILLED HOLE LOCATED ON SHOULDER W/CENTER 0.170 IN. MIN TO 0.180 IN. MAX FROM END OF LARGER SHANK |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE SAE |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.1850 AND INCHES MAXIMUM 0.1900 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 2466 | 61208 |